We have a new firmware update for the AirPods Pro 3 dubbed 9B47 which replaces 9A348. As usual, no update notes from Apple about the changes, but when I was measuring it against the previous firmware, there seems to be some changes which we’re going to dive into. It’s what I do on this channel, I track these firmware updates because Apple doesn’t say if they have any impact on performance, positive or otherwise.
Microphone Quality
In terms of microphone pickup, on iOS it seems pretty similar to the previous firmware 9A348 on voice isolation mode, but I’m seeing quite a huge improvement on Android. Voice filtering and background noise reduction seems to work better now on 9B47, so more of my voice is coming through even if I’m not using an Apple device.
👉🏻 Listen to the mic quality samples
Active Noise Cancelling
As for its active noise canceling, it doesn’t seem like there are any changes, noise canceling in actual usage seems as effective, but according to my measurements, it seems to be a little weaker in the lower midrange. But as I said, can barely tell the difference even in terms of how effectively they block human voices.
Transparency Mode
As for its transparency mode, there seems to be more emphasis now in amplifying ambient sounds in the upper midrange around 1.8khz instead of 2.5 khz, and in theory, it may be possible to hear some difference, like maybe if you were speaking to somebody, the person’s voice will sound a bit less sizzly, but the actual difference is too small for most people to notice.
Sound Quality
As for sound quality, this is one area which I’m seeing a bit more change on the new firmware. The AirPods Pro 3’s tuning seems to be flatter than on the previous update 9A348. In fact it’s now closer to the previous firmware 8B41, but has a little more bass and a little less upper midrange emphasis.
However, unlike on older firmwares, starting from 9A348 you can tweak its sound with a 3-band graphic EQ, in this video I show you how, so if you do detect any changes you don’t like on the new firmware, just make the necessary adjustments.
So that’s how the new firmware 9B47 compares to 9A348. Let us know in the comments if you’ve also spotted any difference not mentioned here, and subscribe to the main channel if you want to track these firmwares with me!